圓滿落幕｜伊索（大連）出展上海國際傳感器技術與應用展覽會

滬上金秋，秋雨隱隱帶著一絲涼意，

伊索的展位熱度卻逆勢而上，熱度爆棚。

在上海國際傳感器展會現場，

開展三天，門庭若市。

今天，小伊陪大家回顧現場，感受如火如荼的鎧裝絲熱潮。

ISOMIL-M

Mineral Insulated Measurement Cables

The inner conductor is generally a low resistive wire (in some cases several wires) which transmits the electrical signal. Conductors of this type are used in measurement and control techniques and thus referred to as sheathed measurement conductors.

Type denotation ISOMIL-M

Example: The type Denotation 2C2A60 designates a cable coil with 2 cores, inner conductors made of cooper, insulation made of MgO (97%), the sheath material 1.4541 and an outer diameter of 6 mm.

ISOMIL-H – Mineral Insulated Heating Cables

Mineral Insulated Heating Cables

The inner conductor is a heating wire made of suitable material and with appropriate dimensions for electrical resistance heating. This combination is called a sheathed heating conductor. Our further company MiL Heating Systems GmbH Poductname ISOHEAT offers ISOMIL-H heating elements with cold ends ready terminated in all lengths on customers requirements.

ISOMIL-T

Mineral Insulated Thermocouple Cables

In ISOMIL-T the thermoelectric voltages of the thermocouples are in accordance with the basic standard values within the usual tolerance range. For NiCr-Ni the basic values of the thermoelectric voltage are identical in the German and international standards. For both Fe-CuNi (Thermoiron-Thermoconstantan) and Cu-CuNi (Thermocopper-Thermoconstantan) they differ.