東莞祥興儀器有限公司
<tfoot id="qqie6"></tfoot>
<ul id="qqie6"></ul> 東莞祥興儀器有限公司
德國UV-int160UV能量計型號：德國UV-int160儀器適用：測量UV紫外光強度，能量，溫度，儀器裝有軟件，具有記憶功能，能聯電腦使用
德國UV-int160
UV能量計
型 號：德國UV-int160
儀器適用： 測量UV紫外光強度，能量，溫度，
儀器裝有軟件，具有記憶功能，能聯電腦使用。
波長范圍： UV 250 - 410 nm
輸入功率： 0 -- 5,000 mW/
測量范圍： 0-- 2,000 mW/cm2
顯示范圍： 0 -- 36,000 mJ/cm2
能量顯示： 2×16位LCD液晶
測量精度： ± 5 %
測量溫度： 0--115°C
取樣速度： 0.01 秒(100次/秒)
記錄周期： 120秒.
儀器電源： 2 ×3.6 V 長效鋰電池
儀器功耗： 20 uA
電池壽命： 2,000 次
儀器尺寸： 120×70×13 mm
儀器重量： 200 g
工作極限： 置于110°C 測量環境中≯10秒
儀器功能：
1.儀器裝有UV傳感器與微處理器；
2.裝有測量記憶軟件，能將測量到的光強度、能量、溫度值輸入到電腦里；
3.具能自動開機，自動關機功能；
4.置于儀器背后的傳感器上覆有保護材料
UV Integrator 160
+ UV-intensity mW/cm2
+ UV-dose mJ/cm2
+ selectable “triggered mode"*
+ LCD display
+ temperature °C/°F
+ SD Memory Card Slot
+ graphic chart on PC
+ re-chargeable accu cells with charger
The UV Integrator 160 is a small, self-contained, high quality UV measuring instrument. It is designed to
measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV
curing process.
In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring
of:
Full UV 250 – 410 nm
Temp 32 to 230° F / 0 to 110° C
With this total UV bａnd peak energy and dose measuring, most of the measuring requirements of UV
curing applications can be covered.
Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display
the peak UV-intensity of the total UV spectrum (mW/cm2).
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total
Integral of UV-dosage over the full UV spectral bands.
An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C.
The sensors are on the back of the unit which also serves as a heat shield. After completion of the
measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display.
*This Integrator features a selectable „triggered mode“, i.e. the 60 sec recording cycle starts within a 120
second readiness phase not before the incident UV-intensity exceeds 2 mW/cm².
This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data
are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation
software allows to show, edit and store a history of the measuring results of the entire measuring cycle as
graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F).
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy
saving and extension of the battery service life.
The UV Integrator 160 is available in five different measuring ranges:
(Please state upon order)
Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp
Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp
Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp
Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp
Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp
Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
