電動剪擴鉗 剪擴鉗

電動剪擴鉗 剪擴鉗 型號：TC-BC350
用途Introduction：一體化液壓破拆工具，用于剪切與擴張的搶險救援作業。自備電源，便攜操作。
Battery-powered Hydraulic resuce Combi Tool for cutting and spreading. Self-powered, portable operation.
原理Principle：直流電機驅動柱塞泵在液壓缸內形成液壓油流體，液壓缸推動活塞桿往復運動，以實現剪切擴張刀片的剪切擴張作業。直流電機采用高容量鋰電池。
DC motor driven high pressure piston pump high-pressure fluid in the hydraulic cylinder, hydraulic cylinder push rod reciprocating motion,Driven expansion of blade cutting and spreading operation. High-capacity lithium battery
特點Features：
集成液壓泵、切割工具于一體，自成電液體系，不再需要額外的機動液壓泵或手動液壓泵，當然也不再需要液壓油管 Integrated hydraulic pumps, cutting tools in one, self-made electro-hydraulic system, eliminating the need of additional mechanical pump or manual pump, of course, no longer need to hydraulic hose
Z大可剪切22mmQ235圓鋼或5mm的鋼板 Max.cutting 22mmQ235 round bar or 5mm steel plate
開動扳 ji就可作業 trigger can start work
可做360度旋轉，適合有限空間 360-degree rotation, suitable for narrow rescue
14分鐘快速充電，充滿電后可切割直徑16mm圓鋼90次。14 minutes fast charge, fully charged, continuous cut 90 times diameter of 16mm rebar (Q235)
技術數據Specification：

正常剪斷直徑normal cutting capacityQ235圓鋼≥φ20mm、Q235板材≥3 mm; Q235 round ≥ φ20mm, Q235 ≥ 3 mm steel plate

Z大剪斷直徑max.cutting capacity
Q235圓鋼≥φ22 mm、Q235板材≥5 mm; Q235 round ≥ φ22mm, Q235 ≥ 5 mm steel plate

Z大切割開口Max. cutter opening：30mm

Z大切割力（在刀口槽口處）Max. cutting force (at blade notch)：325kN



Z大擴張力Max. spreading force (120mm from tips)：135kN

電源battery ：鋰電池 24V DC 3.0Ah; 24V DC 3.0Ah Lithium Battery

尺寸Dimensions（L×W×H）：
張開狀態blades open：730×145×333mm閉合狀態blades closed：740×180×333mm

重量（帶電池）Weight (including battery)：16kg

標準配件parts：電池2塊、電池充電器、手提箱、液壓油