| Frequency options |
| N9030B-503 | Frequency Range, 3 Hz to 3.6 GHz - Frequency Range: 3 Hz to 3.6 GHz
- Available at time of purchase only
|
| N9030B-508 | Frequency Range, 3 Hz to 8.4 GHz - Frequency Range: 3 Hz to 8.4 GHz
- Available at time of purchase only
|
| N9030B-513 | Frequency Range, 3 Hz to 13.6 GHz - Frequency Range: 3 Hz to 13.6 GHz
- Available at time of purchase only
|
| N9030B-526 | Frequency Range, 3 Hz to 26.5 GHz - Frequency Range: 3 Hz to 26.5 GHz
- Available at time of purchase only
|
| N9030B-544 | Frequency Range, 3 Hz to 44 GHz - Frequency Range: 3 Hz to 44 GHz
- Available at time of purchase only
|
| N9030B-550 | Frequency Range, 3 Hz to 50 GHz - Frequency Range: 3 Hz to 50 GHz
- Available at time of purchase only
|
| |
| Preamplifier options |
| N9030B-P03 | Preamplifier, 3.6 GHz - 20 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P08 | Preamplifier, 8.4 GHz - 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P13 | Preamplifier, 13.6 GHz - 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P26 | Preamplifier, 26.5 GHz - 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P44 | Preamplifier, 44 GHz - 40 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P50 | Preamplifier, 50 GHz - 40 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| |
| Bandwidth options |
| N9030B-B2X | 分析帶寬，255 MHz - 分析帶寬擴展到 255 MHz
- ??頻率范圍：3 Hz 至 8.4、13.6、26.5 GHz
- ??需要選件 EP0
- ??捕獲存儲器：2 GB
- ??ADC 分辨率：14 位
- ??可通過售后升級提供
|
| N9030B-B40 | Analysis Bandwidth, 40 MHz - Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B1X | Analysis Bandwidth, 160 MHz - Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B85 | Analysis Bandwidth, 85 MHz - Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B5X | 分析帶寬，510 MHz - 分析帶寬擴展到 510 MHz
- ??頻率范圍：3 Hz 至 8.4、13.6、26.5 GHz
- ??需要選件 EP0
- ??捕獲存儲器：2 GB
- ??ADC 分辨率：14 位
- ??可通過售后升級提供
|
| |
| Performance Options |
| N9030B-EA3 | Electronic Attenuator, 3.6 GHz, Upgrade - Frequency range: 3 Hz to 3.6 GHz
- Step size: 1 dB
- Range: 0 to 24 dB
- Full range including mechanical attenuation: 94 dB
- Available as a post-purchase upgrade
|
| N9030B-EDP | Enhanced Display Package License - Spectrogram: Time, amplitude, frequency and delta markers
- Trace Zoom: Both traces active, lower trace a subset of upper trace
- Zone Span: One trace updated at a time, independent bandwidths, point and sweep time
- Available as a post-purchase upgrade
|
| N9030B-EMC | Basic EMC Functionality License - CISPR 16-1-1 (2010) fully-compliant detectors
- CISPR bａnd presets to 18 GHz
- Measure at marker with three detectors
- Tune and listen for signal discrimination
- Can be added as a product upgrade
- Available as a post-purchase upgrade
|
| N9030B-FP2 | Fast Power, up to 40 MHz Bandwidth - Enables hardware accelerated fast power measurement capability
- 40 MHz single acquisition bandwidth
- Optimized for power measurements such as Channel Power, Adjacent Channel Power, Occupied Bandwidth and Harmonic measurements
- Available as a post-purchase upgrade
|
| N9030B-FT1 | Frequency Mask Trigger, Basic Detection License - Capture elusive, intermittent signals for further analysis
- > 15 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
| N9030B-FT2 | Frequency Mask Trigger, Optimum Detection License - Capture elusive, intermittent signals for further analysis
- > 3.6 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
| N9030B-LNP | Low Noise Path - See low-level signals in the presence of high-level signals at microwave frequencies
- Enhanced SHI and noise floor performance
- Available > 3.6 GHz
- Available as a post-purchase upgrade
|
| N9030B-MPB | Microwave Preselector Bypass - Excellent widebａnd amplitude flatness and phase linearity
- Improve measurement repeatability in the higher bands
- Increased IF output bandwidth
- Available as a post-purchase upgrade
|
| N9030B-RTS | Real-Time Widebａnd I/Q Data Streaming - Up to 255 MHz gap-free I/Q data streaming
- Available as a post-purchase upgrade
|
| N9030B-TDS | Time Domain Scan - ~90% overlap in the time domain for amplitude accuracy and fast transient capture
- CISPR-compliant amplitude accuracy and weighted detector performance
- Monitor spectrum and amplitude probability distribution
- Available as a post-purchase upgrade
|
| N9030B-EP0 | 增強的相位噪聲 DDS LO - 增強相位噪聲性能的直接數字合成本地振蕩器
- ??-136 dBc/Hz 相位噪聲（1 GHz 載波，10 kHz 頻偏）
- ??可通過售后升級提供
|
| N9030B-DUA | Duplex IF RTSA - Enables control of 2 x 255MHz DIF for optimized frequency and time domain analysis in RTSA mode at the same center frequency
- Able to view RT spectrum, Power vs Time, Powergram, and Spectrogram all at the same time with independent time domain and frequency domain spans
- Requires option B5X and RT1 or RT2
- Available as a post-purchase upgrade
|
| |
| Basebａnd Inputs |
| N9030B-BBA | I/Q Basebａnd Inputs, Analog - Input impedance: Selectable 50 ohm and 1 Mohm
- Basebａnd bandwidth: 10 MHz standard/optional 25 MHz or 40 MHz
- Basebａnd capture memory: 500 MSamples (2 GB) standard
- Available on 3.6, 8.4, 13.6 or 26.5 GHz PXA
- Available as a post-purchase upgrade
|
| |
| Calibration Options |
| N9030B-A6J | ANSI Z540-1-1994 Calibration - Ships from the factory with ISO 17025 calibration
- Provides measurement results, uncertainties and specifications with guardbands
- Uncertainties are not included in the determination of the pass/fail status
- Available at time of purchase only
|
| N9030B-AMG | Calibration + Uncertainties + Guardbanding (Accredited) - Ships from the factory with ISO 17025 calibration
- Provides measurement results, uncertainties and specifications with guardbands
- Uncertainties are not included in the determination of the pass/fail status
- Available at time of purchase only
|
| N9030B-UK6 | Commercial Calibration Certificate with Test Data - Commercial calibration performed by the Keysight factory
- Printed copy of the calibration certificate
- Instructions to download a PDF of the test data report from Infoline
- Available at time of purchase only
|
| |
| Connector Options |
| N9030B-ALV | Auxiliary Log Video Output - Output varies about 25 mV/dB
- Top of the screen is 1.6 Volts
- Output impedance is 50 ohms (nominal)
- Available as a post-purchase upgrade
|
| N9030B-C35 | APC 3.5 mm Connector - Replaces the standard type-N connector with APC 3.5 mm connector
- Available on the 26.5 GHz PXA (Option 526) only
- Available as a post-purchase upgrade
|
| N9030B-CR3 | Connector, Widebａnd IF Output Upgrade - IF output bandwidth up to 700 MHz with preselector bypassed
- Expandable to 900 MHz with corrections
- Connector: SMA female, 50-ohm impedance nominal
- Available as a post-purchase upgrade
|
| N9030B-CRP | Connector Rear, Programmable IF Output - Frequency of the IF output is adjustable from 10 to 75 MHz, in 500 kHz steps
- IF output bandwidth is 100 MHz nominal at 70 MHz center frequency
- Connector type: SMA (female), 50-ohm impedance nominal
- Available as a post-purchase upgrade
|
| N9030B-YAV | Y-Axis Video Output - Screen video out looks like the display video
- Log video to the analog out connector is 1 Volt full scale
- Linear video to the analog out is in linear scale
- Available as a post-purchase upgrade
|
| |
| External Mixing |
| N9030B-EXM | External Mixing - Analyze signals up to 110 GHz
- Amplitude corrections for conversion loss
- Signal identification, mixer biasing (-5 mA to +5 mA)
- Supports 89600 VSA software
- Available as a post-purchase upgrade
|
| |
| Real time signal analysis |
| N9030B-RT1 | Real-time analysis up to maximum available BW, basic detection license |
| N9030B-RT2 | Real-time analysis up to maximum available BW, optimum detection, license |
| |
| Security - PC Features |
| N9030B-SF1 | Security Features, Exclude Launching Programs - Ability to limit menu selections and SCPI commands to improve instrument security
- Prevent the launching of Windows programs from the instrument application
- Reduce the instrument’s vulnerability to the effects of unauthorized or undesirable third-party programs or scripts
- Available as a post-purchase upgrade
|
| N9030B-SF2 | Security Features, Prohibit Saving Results - Restricts ability to save measurement results or user configuration to improve security
- Prohibits saving results or setups to solid state drive
- Instrument softkeys and SCPI commands eliminate the ability to save or recall user data
- Available as a post-purchase upgrade
|
| N9030B-SSD | Additional Removable Solid State Drive - Rugged removable bay, minimum 1,500 insertion cycles
- Fully imaged with the operating system, PXA instrument software, instrument-specific alignment files
- Available as a post-purchase upgrade
|
| |
| Source Connectivity |
| N9030B-ESC | External Source Control - Control Keysight signal generators up to 50 GHz
- Control signal sources
- Hardware or software triggering
- Includes a variety of sweep modes
- Adjustable resolution bandwidth and detector settings
- Available as a post-purchase upgrade
|
| |
| Application Software |
| 89601B | - 89600 VSA 軟件  - 蜂窩、無線連通性、航空航天、國防、通用
- 同時查看多個時域、頻域和調制域視圖
- *故障診斷工具包括觸發、記錄和回放
- 支持超過 45 種是德科技測量平臺
|
| N6171A | MATLAB 軟件  - 創建任意波形
- 定制測量/數據分析例程、儀器應用程序/測試系統
- 自動化測量以及信號與報告生成
- 可通過購買兼容儀器從是德科技直接獲得
|
| N9063C | 配有多點觸控用戶界面、適用于 UXA 的模擬解調測量應用軟件  - 多點觸控用戶界面
- 對 AM、FM、PM 和 FM 立體聲信號進行一鍵式測量
- 顯示調制參數：AM 深度、FM/PM 偏差、THD、SINAD、FM 立體聲
- 可作為售后升級選件
|
| N9068C | Phase Noise Measurement Application, Multi-touch UI  - 1-touch measurements for analyzing phase noise in frequency domain (log plot) & time domain (spot frequency)
|
| N9069C | 噪聲系數測量應用軟件，多點觸控用戶界面  - 噪聲系數/增益測量
- 一鍵式測量：噪聲系數、增益、Y 因數、有效溫度和熱態/冷態功率密度
- 支持 SNS 346 系列噪聲源和 U7227x 系列 USB 前置放大器
- 可作為售后升級選件
|
| N9071C | GSM / EDGE / Evo Measurement Application, Multi-Touch UI  - GSM, EDGE and EDGE Evolution including VAMOS1 and Multi-Carrier BTS (MCBTS) per 3GPP GERAN standard
- Base station and station RF transmitter measurements; analog basebａnd measurements One-button measurements with pass/fail per the standard
|
| N9073C | W-CDMA/HSPA/HSPA+ Measurement Application, Multi-touch UI  - W-CDMA/HSPA/HSPA+ per 3GPP Release 99 to 8
- Includes uplink/downlink RF transmitter measurements
- Transmit analog basebａnd measurements with BBIQ hardware
- 1-touch measurements with pass/fail per the standard
|
| N9077C | WLAN 802.11a/b/g/j/p/n/ac/af/ah/ax Measurement Application, Multi-Touch UI  - Compliant to 802.11a/b/g/j/p/n, 802.11ac, 802.11af, 802.11ah, 802.11ax IEEE series standards for WLAN design/manufacturing test
- Manual settings for 802.11a-turbo mode
- One-button pass/fail measurements per standard
|
| N9080C | LTE/LTE-Advanced FDD 測量應用軟件，多點觸控用戶界面  - 按照 3GPP 第 8 版到第 13 版標準進行 LTE 和 LTE-Advanced FDD 信號分析
- 使用單一選件提供上行鏈路和下行鏈路測量
- 多達 5 個子載波的載波聚合
- 在具有多點觸控用戶界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信號分析儀中運行
|
| N9082C | LTE / LTE-Advanced TDD Measurement Application, Multi-touch UI  - LTE and LTE-Advanced TDD per 3GPP Release 8 to 12
- Includes Uplink and downlink measurements in a single option
- Carrier aggregation up to five component carriers
- Runs inside UXA, PXA, MXA, EXA and CXA X-Series signal analyzers with multi-touch UI
|
| N9081C | Bluetooth Measurement Application, Multi-Touch UI  - Compliant with Bluetooth® Core Specification Version 2.1+ EDR & Low Energy (BR/EDR/LE 4.0/4.2/5.0)
- One-button measurements with pass/fail per the standard
|
| N9084C | Short Range Communications Measurement Application, Multi-Touch UI  - Compliant with ZigBee (IEEE 802.15.4) and Z-Wave RF transmitter tests
- One-button measurements with pass/fail per the standard
- Runs inside UXA, PXA, MXA, EXA, and CXA X-Series signal analyzers with multi-touch UI
|
| N9067C | Pulse Measurement Application, Multi-touch UI  - Automatically synchronize to pulsed signals up to 50 GHz and bandwidth of 510 MHz
- View key pulse signal modulation performance indicators and pulses in a time, frequency and phase-domains
- Runs inside X-Series signal analyzers with multi-touch UI
|
| N6141C | EMI Measurement Application, Multi-Touch UI  - Built-in CISPR and MIL-STD compliant bandwidths, detectors and bａnd presets
- Automated testing to regulatory Limit Lines with user-selected margins
- Amplitude correction for antennas, LISNs, cables, preamps
|
| N9054C | VMA 矢量調制分析應用軟件，多點觸控用戶界面  - 用于猝發分析的 FFT 頻譜分析和時域分析工具
- 通用模擬和數字調制分析（可選）
- 在具有多點觸控用戶界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信號分析儀中運行
|
| N9061C | Remote Language Compatibility Application, Multi-Touch UI  - Emulate HP/Keysight 856xE/EC or 8566/8568 spectrum analyzers in remotely controlled, ATE systems
- Migrate 856xE/EC-based or 8566/8568-based ATE systems to seamlessly include a modern signal analyzer
|
| |
| Real Time Recorder |
| N9030B-RTR | Real-Time Spectrum Recorder and Analyzer Application Example, License - Real-time spectrum recorder and analyzer application example
- Modifiable application and source code
- Live and saved data operating modes
- Available as a post-purchase upgrade
|
| |
| Accessories |
| 1CM113A | Rack mount flange kit 177.0mm H (4U) - two flange brackets, 2015 color |
| 1CN103A | Handle kit 177.0mm H (4U) - two front handles, 2015 color |
| 1CP105A | Rack mount flange and handle kit 177.0mm H (4U) - two brackets and front handles |
| 1DVR001A | ROM/CD-R/RW drive |
| 1KBD001A | USB keyboard-smaller keyboard |
| 1MSE001A | Mouse |
| MLP001A | Minimum loss pad, 50 to 75 ohm |
| 1CR014A | Rack Slide Kit for 17-inch and 20-inch Mounting Holes |
| |
| |
| Additional Documentation |
| N9030B-AB2 | Chinese localization, user interface and getting started guide |
| N9030B-ABE | Spanish localization, user interface and getting started guide |
| N9030B-ABF | French localization, user interface and getting started guide |
| N9030B-ABJ | Japanese localization, user interface and getting started guide |
| N9030B-AKT | Russian localization, user interface and getting started guide |
| N9030B-AB1 | Korean localization, user interface and getting started guide |
