INT 30H 風向傳感器
INT系列風速風向計產品簡介
功能描述
KRIWAN風向傳感器用來測量144個風向。一個用來防止結冰的自調節PTC一加熱裝置和電阻器彼此連接在傳感器的端口和外罩之間用來防止靜電放電、信號通過光電方式產生。 一個內置的電路回路把光信號進行解碼變成一個與極性無關的兩路信號。
| 測量范圍 | 0-360° |
| 精確度 | ± 2.5° |
| 開始風速 | <0,4m/s |
| 信號輸出 | DC 4...20mA, limited to 20,5mA / DC 0-10V |
| 連接 | DC 24V ±25%, 防反向連接 |
| 連接方式 | 5-pole plug (M12) |
| 定點連接導線 | 4 x 0,75mm2 |
| 加熱 | 自控加熱，連接AC/DC 30V ±20% . 20VA |
| 安裝 | pipe type mast Ø48 mm, Ø inside at least 37mm |
| 尺寸 | 60x105mm, length of wind arrov 358mm |
| 桅桿安裝 | 2 VA-wing screw M8x16mm |
| 重量 | 500g |
INT series wind speed and direction meter product introduction
Int series of anemorumbometer are Germany KRIWAN industrial design and development company development, used for measurement and monitoring of the wind and the wind instruments such as used in the installation of crane monitoring, wind farm, wind tower, skiing, cableway, building systems, blind protection, meteorological stations and scientific research. This series of products is metal (aluminum) design, compact appearance, wide temperature range of - 40--70℃, the deviations of the real instructions, no linear error ", in shock and vibration on high standard (broadbａnd noise), 99% free maintenance, the blades rotate at high speed deformation, anti dust and anti seawater corrosion Corrosion, low starting wind speed (<0.4 M / s), anti high frequency electromagnetic interference (Env 50140 Teil 3, E=100V/m, 30... 1000MHz), suitable for high-end application environment. This series of products have passed the ISO9001 / 2000 management system certification, UL, CSA, CE international certification, with IP54 protection grade certification.
Function description
KRIWAN wind direction sensor 144 wind measurements. A to prevent icing self regulating PTC heating device, and a resistor connected to each other in between the sensor port and the outer cover to prevent electrostatic discharge, the signal produced by photoelectric method. A built-in circuit for the optical signal to signal is decoded into a and independent of the polarity of the two signals.
| Measuring range | 0...360° |
| Accuracy | ±2.5° |
| Resolving power | <0,1m/s |
| Starting wind speed | <0,4m/s |
| Signal output | DC 4...20mA, limited to 20,5mA / DC 0-10V |
| Connect | DC 24V +50/-25%, reverse connection |
| Connection mode | 5 Pin- plug (M12 |
| Fixed connection conductor | 4 x 0,75mm2 |
| Heating | Self controlled heating, power supply 30V AC/DC + 20% max. 20VA |
| Install | Ø48 mm ointernal tubular mast mast minimumØ 37mm
|
| Size | 60x115mm rotating Ø212mm vane vane |
| Mast installation | 2 VA- airfoil screw M8x16mm |
| Weight | 400g (600g) when there is a cable connection |
| Protection level | IP54 according to EN60529 |
